TDA4VM: How to read PMIC registers

Jack

Part Number: TDA4VM

Hi TI

There's a question that Customer wants to clarify.

Actually the customer board does not work since PMIC does not ptroduce 1.8V only.

The orginial thread is from:

Could you please let us know how to read PMICs register using Processor SDK?

I'd appreciate if the example code and instruction are available.

Thanks

Regards,

Jack

0 Jack over 4 years ago

Hi TI

I am able to test TDA4/DRA82x Diagnostics Applications via sdcard boot.

If the diagnostics for PMIC will be available from RTOS SDK, I will try.

I am expecting your guidance to access PMIC registers from the earlier stage of booting sequence.

Regards.

Jack

+1 Keerthy J over 4 years ago in reply to Jack

Jack,

Examples are available in ti-processor-sdk-rtos-j721e-evm-07_03_00_07\pdk_jacinto_07_03_00_29\packages\ti\drv\pmic\test

Regards,
Keerthy

0 Jack over 4 years ago in reply to Keerthy J

Keerthy.

Customer tried to read PMIC register by using raspberry pi.

I'll look into detail RTOS SDK what you said.

Thanks.

Regards,

Jack

Processors forum