dsp 6713 Configurations

Meriem Demraoui

Hello,

i want to programming DSP, when i load program to DSP and to run it i dont have any result

i use C6713 and CCS,i just write program in C and i have the executable file, I use also the AIC23 for converting data, i want to khow how can i configure

the DSP to process the data in the program and so give results??

over 14 years ago

0 DanRinkes over 14 years ago

TI__Expert 8055 points

Meriem,

I'd suggest going through the workshop material here: http://processors.wiki.ti.com/index.php/TMS320C6x1x_DSP_Integration_Workshop

What you are asking is very difficult to explain in a Forum like this. Essentially, you should probably become familiar with a number of peripherals, including the EDMA and the McBSP, along with the AIC23 peripheral that is on your board. If you're using the 6713 DSK, you will find an example in the workshop materials that is very similar to what you are trying to do.

Regards,

Dan

Processors

Processors forum

dsp 6713 Configurations