Hello TI expert
From tda3x evm schematic Page9 system control, i have a question to make clearly.
Why is the system boot connected to GMPC, I think the system boot pin should be independent.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello TI expert
From tda3x evm schematic Page9 system control, i have a question to make clearly.
Why is the system boot connected to GMPC, I think the system boot pin should be independent.
Hello,
Refer to the device data manual:
https://www.ti.com/lit/ds/symlink/tda3la.pdf
The sys boot pins are muxed with gpio pins, as shown here:
Regards,
Kyle