TMS320C6678: EMIF16 config register

Where does the EMIF initialization happen in CSL code vs when you are browsing the memory browser ? Can you run the CSL code and then try to access the memory browser ? if you are already doing that , the only other thing i can think of is that what GEL file is used and whether it does the memory map setting appropriately ... 

for e.g. here is a snapshot from a K2E Gel file

hotmenu Setup_Memory_Map( )
{
	GEL_TextOut("Setup_Memory_Map...\n",,);

	GEL_MapOn( );
	GEL_MapReset( );

	GEL_MapAddStr( 0x00000000, 0, 0x21400000, "R|W|AS4", 0 );   // 
	GEL_MapAddStr( 0x21400000,0, 0x00000080, "R|W|AS4", 0 );   // Hyperlink Config (remote)	
	//GEL_MapAddStr( 0x21400080,0, 0x00000080, "R|W|AS4", 0 );   // Hyperlink Config (remote)
	GEL_MapAddStr( 0x21400200, 0, 0xdebffe00, "R|W|AS4", 0 );   // 
	GEL_TextOut( "Setup_Memory_Map... Done.\n" );
}