TDA4VM: Stop at "Initlialzing DDR ..." using SBL when doing soft reset.

hutian

Expert 1785 points

Part Number: TDA4VM

Hi experts,

When the TDA4VM is reset by soft-reset, then the TDA4VM will stop at "Initlialzing DDR ...".

I have check the source code and it stuck at the reading the BOARD_DDR_FSP_CLKCHNG_REQ_ADDR:

Could you help me to solve this problem?

Thanks,

Hutian

0 ANUBHAV AKASH over 4 years ago

Hi,

Can you provide little more details here, so that it easy for us to reproduce your use case at our end:

+1 hutian over 4 years ago in reply to ANUBHAV AKASH

Expert 1785 points

Hi Anubhav,

We are using SDK7.2 with SBL+Autosar+RTOS+QNX. No example here, just using the RTOS SDK's SBL to booting Autosar.

When using reset, then the SBL will stuck at reading the BOARD_DDR_FSP_CLKCHNG_REQ_ADDR.

Thanks,

hutian

Processors forum