AM5726: Regarding linker command file on non SMP mode

Hi,

Linker file is something which can be written application specific like what should be the size of heap/stack and other memory. But if you look at high level, the linker file will not change between A15_0 and A15_1. 

You can see this for linker introduction:

• https://software-dl.ti.com/ccs/esd/documents/sdto_cgt_Linker-Command-File-Primer.html
• https://software-dl.ti.com/ccs/esd/documents/sdto_cgt_linker_special_section_types.html