TDA4VM: How to use APP(MCU) with vision_apps(MPU) on EVM in Linux+RTOS mode(via SD card boot)

OBUCHI YOHEI

Part Number: TDA4VM

Hi , experts.

I use vision_apps on TDA4VM.
I followed instructions and it was successful.("Run vision apps on EVM in Linux+RTOS mode (via SD card boot)")

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/latest/exports/docs/vision_apps/docs/user_guide/BUILD_AND_RUN.html

Additionally , I want to start my application on MCU domain(mcu1_0).
MCU1_0:RTOS (my app)
MPU1_0:Linux (vision_apps)

Could you tell me how to build and run it?

■ SDK
ti-processor-sdk-rtos-j721e-evm-08_00_00_12
ti-processor-sdk-linux-j7-evm-08_00_00_08

Regards,

over 3 years ago

+1 Brijesh Jadav over 3 years ago

TI__Guru**** 476905 points

Hi,

mcu1_0 runs the sciserver, so in this case, if you want to run your own application on mcu1_0, you would require to integrate sciserver also in your application and follow developer note on below link to integrate the new application in uboot.

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/08_00_00_12/exports/docs/psdk_rtos/docs/user_guide/developer_notes_mcu1_0_sysfw.html#spl-uboot-loading

Regards,

Brijesh

0 OBUCHI YOHEI over 3 years ago in reply to Brijesh Jadav

Prodigy 210 points

Hi Brijesh

Thank you for quick reply.
I checked the developer note and it is just howto I needed.
I will try it.

0 Brijesh Jadav over 3 years ago in reply to OBUCHI YOHEI

TI__Guru**** 476905 points

Thanks, closing this thread.

Processors

Processors forum

TDA4VM: How to use APP(MCU) with vision_apps(MPU) on EVM in Linux+RTOS mode(via SD card boot)