• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 101 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AM5746: EtherCAT and Basic industrial protocols

AM5746: Differences in part number

Kanae
Mastermind 9865 points
Part Number: AM5746

Hi Support Team,

If a custom board is changed from AM5746ABZXA to AM5746ABZXEA,
is it correct that the artwork will not be affected because the only differences in the part number is as follows?

　E: All industrial protocols enabled (basic protocols plus EtherCAT slave and POWERLINK slave)
or
　BLANK: Basic industrial protocols enabled

Best regards,
Kanae

  • +1
    TI__Mastermind 37435 points

    Hi Kanae,

    Kanae said:
    If a custom board is changed from AM5746ABZXA to AM5746ABZXEA,
    is it correct that the artwork will not be affected because the only differences in the part number is as follows?

    That is correct, no change in board design. It's just a difference in Efuse programming between the two

    Regards

    Vineet