I am getting the following error when trying to run the notify example. Can someone help decipher?
main: MultiProc id = 0
tsk1_func: Sent request #1 to DSP (lineId = 0)
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
Invalid CIO command (47) in the CIO buffer at address (0x800049d8) was not recognized. Please check the device and program memory maps.
tsk1_func: Received request #1 from DSP (lineId = 1)
tsk1_func: Sent request #1 to DSP (lineId = 1)
Thx,
MikeH
