• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 402 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: linux 3.2.2.11. PCIe Backplane test error

Thomas Yang
Prodigy 100 points

Part Number: TDA4VM

Hi TI Team:

We test pcie Backplane use 3.2.2.11. PCIe Backplane — Processor SDK Linux for J721e Documentation.

the test SDK is 8.0

at ep side we config:

root@j7-evm:~# ls
ntb_test.sh
root@j7-evm:~# cat ntb_test.sh
#!/bin/sh
cd /sys/kernel/config/pci_ep/
mkdir functions/pci_epf_ntb/func1
echo 0x104c > functions/pci_epf_ntb/func1/vendorid
echo 0xbd01 > functions/pci_epf_ntb/func1/deviceid
mkdir functions/pci_epf_ntb/func1/pci_epf_ntb.0/
echo 4 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/db_count
echo 128 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/spad_count
echo 2 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/num_mws
echo 0x100000 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/mw1
echo 0x100000 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/mw2
ln -s controllers/2900000.pcie-ep/ functions/pci_epf_ntb/func1/primary
ln -s controllers/2910000.pcie-ep/ functions/pci_epf_ntb/func1/secondary
echo 1 > controllers/2900000.pcie-ep/start
echo 1 > controllers/2910000.pcie-ep/start
root@j7-evm:~#

but when we start up rc side EVM , the error occurred。 the error log is follow:

160057] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400
[    2.166196] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.176066] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.185955] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xe8 may corrupt adjacent RW1C bits
[    2.195914] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    2.205884] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x92 may corrupt adjacent RW1C bits
[    2.215843] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xb2 may corrupt adjacent RW1C bits
[    2.225828] pci 0000:00:00.0: supports D1
[    2.229921] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.235793] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x84 may corrupt adjacent RW1C bits
[    2.247575] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.255764] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    2.265726] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    2.275685] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    2.287291] pci_bus 0000:01: busn_res: [bus 01-0f] end is updated to 01
[    2.294059] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.299336] pcieport 0000:00:00.0: PME: Signaling with IRQ 56
[    2.305664] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[    2.313337] j721e-pcie 2910000.pcie:       IO 0x0018001000..0x0018010fff -> 0x0018001000
[    2.321614] j721e-pcie 2910000.pcie:      MEM 0x0018011000..0x001fffffff -> 0x0018011000
[    2.329906] j721e-pcie 2910000.pcie:   IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[    2.439971] j721e-pcie 2910000.pcie: Link up
[    2.444385] j721e-pcie 2910000.pcie: PCI host bridge to bus 0001:00
[    2.450791] pci_bus 0001:00: root bus resource [bus 00-0f]
[    2.456396] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x18001000-0x18010fff])
[    2.466264] pci_bus 0001:00: root bus resource [mem 0x18011000-0x1fffffff]
[    2.473308] pci 0001:00:00.0: [104c:b00d] type 01 class 0x060400
[    2.479507] pci 0001:00:00.0: supports D1
[    2.483601] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    2.491293] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.499639] pci 0001:01:00.0: [104c:bd01] type 00 class 0x050000
[    2.505806] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000003ff]
[    2.512220] pci 0001:01:00.0: reg 0x14: [mem 0x00000000-0x000001ff]
[    2.518671] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x001fffff]
[    2.525122] pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x000fffff]
[    2.532616] pci 0001:01:00.0: supports D1
[    2.536709] pci 0001:01:00.0: PME# supported from D0 D1 D3hot
[    2.542713] pci 0001:01:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit]
[    2.549739] pci 0001:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs)
ERROR:   Unhandled External Abort received on 0x80000000 from S-EL1
ERROR:   exception reason=0 syndrome=0xbf000000
Unhandled Exception from EL1
x0             = 0xffff800014900000
x1             = 0x0000000000000000
x2             = 0xffff800016400008
x3             = 0x0000000000000001
x4             = 0x000000000000000b
x5             = 0xffff0008023d3000
x6             = 0xffff800011b6f864
x7             = 0x000000000000ea60
x8             = 0x0000000080b5111d
x9             = 0x00000000b00d104c
x10            = 0x7f7f7f7f7f7f7f7f
x11            = 0x0101010101010101
x12            = 0xffff000802430326
x13            = 0xffff000802430a1c
x14            = 0xffffffffffffffff
x15            = 0xffff000800351330
x16            = 0xffff0008000223d0
x17            = 0x0000000000000020
x18            = 0x0000000000000000
x19            = 0xffff800011b6f7a4
x20            = 0x0000000000000004
x21            = 0xffff0008023d3800
x22            = 0x0000000000000087
x23            = 0xffff800011b6f864
x24            = 0x0000000000000001
x25            = 0xffff8000112d3a88
x26            = 0x0000000000000001
x27            = 0x0000000000000000
x28            = 0xffff0008023d3000
x29            = 0xffff800011b6f720
x30            = 0xffff8000104ea30c
scr_el3        = 0x000000000000073d
sctlr_el3      = 0x0000000030cd183f
cptr_el3       = 0x0000000000000000
tcr_el3        = 0x0000000080803520
daif           = 0x00000000000002c0
mair_el3       = 0x00000000004404ff
spsr_el3       = 0x0000000020000085
elr_el3        = 0xffff8000104ea324
ttbr0_el3      = 0x0000000070010c00
esr_el3        = 0x00000000bf000000
far_el3        = 0x0000000000000000
spsr_el1       = 0x0000000060000005
elr_el1        = 0xffff8000100b2580
spsr_abt       = 0x0000000000000000
spsr_und       = 0x0000000000000000
spsr_irq       = 0x0000000000000000
spsr_fiq       = 0x0000000000000000
sctlr_el1      = 0x0000000034d4d91d
actlr_el1      = 0x0000000000000000
cpacr_el1      = 0x0000000000300000
csselr_el1     = 0x0000000000000000
sp_el1         = 0xffff800011b6f720
esr_el1        = 0x0000000000000000
ttbr0_el1      = 0x0000000083270000
ttbr1_el1      = 0x0000000082f10000
mair_el1       = 0x000c0400bb44ffff
amair_el1      = 0x0000000000000000
tcr_el1        = 0x00000034f5d07590
tpidr_el1      = 0xffff80086eab0000
tpidr_el0      = 0x0000000000000000
tpidrro_el0    = 0x0000000000000000
par_el1        = 0x0000000000000000
mpidr_el1      = 0x0000000080000000
afsr0_el1      = 0x0000000000000000
afsr1_el1      = 0x0000000000000000
contextidr_el1 = 0x0000000000000000
vbar_el1       = 0xffff800010010800
cntp_ctl_el0   = 0x0000000000000005
cntp_cval_el0  = 0x000000005d2028e8
cntv_ctl_el0   = 0x0000000000000000
cntv_cval_el0  = 0x0000000000000000
cntkctl_el1    = 0x00000000000000d6
sp_el0         = 0x000000007000a3d0
isr_el1        = 0x0000000000000040
dacr32_el2     = 0x0000000000000000
ifsr32_el2     = 0x0000000000000000
cpuectlr_el1   = 0x0000001b00000040
cpumerrsr_el1  = 0x0000000000000000
l2merrsr_el1   = 0x0000000000000000
Can you help solve this problem?
thank you very much!
  • 0
    Prodigy 100 points

    The complete log is as follows：

    [sudo] password for yangyongheng:


    Welcome to minicom 2.7.1

    OPTIONS: I18n
    Compiled on Aug 13 2017, 15:25:34.
    Port /dev/ttyUSB4, 01:01:25

    Press CTRL-A Z for help on special keys


    U-Boot SPL 2021.01-g53e79d0e89 (Aug 04 2021 - 23:32:00 +0000)
    Model: Texas Instruments K3 J721E SoC
    Board: J721EX-PM2-SOM rev E8
    SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
    Trying to boot from MMC2
    Starting ATF on ARM64 core...

    NOTICE: BL31: v2.5(release):08.00.00.004-dirty
    NOTICE: BL31: Built : 22:30:09, Aug 4 2021

    U-Boot SPL 2021.01-g53e79d0e89 (Aug 04 2021 - 22:33:28 +0000)
    Model: Texas Instruments K3 J721E SoC
    Board: J721EX-PM2-SOM rev E8
    SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam')
    Detected: J7X-BASE-CPB rev E3
    Detected: J7X-VSC8514-ETH rev E2
    Trying to boot from MMC2


    U-Boot 2021.01-g53e79d0e89 (Aug 04 2021 - 22:33:28 +0000)

    SoC: J721E SR2.0
    Model: Texas Instruments K3 J721E SoC
    Board: J721EX-PM2-SOM rev E8
    DRAM: 4 GiB
    Flash: 0 Bytes
    MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1
    In: serial@2800000
    Out: serial@2800000
    Err: serial@2800000
    Detected: J7X-BASE-CPB rev E3
    Detected: J7X-VSC8514-ETH rev E2
    Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cp0
    eth0: ethernet@46000000
    Hit any key to stop autoboot: 0
    switch to partitions #0, OK
    mmc1 is current device
    SD/MMC found on device 1
    Failed to load 'boot.scr'
    0 bytes read in 1 ms (0 Bytes/s)
    Loaded env from uEnv.txt
    Importing environment from mmc1 ...
    19137024 bytes read in 800 ms (22.8 MiB/s)
    97586 bytes read in 15 ms (6.2 MiB/s)
    ## Flattened Device Tree blob at 88000000
    Booting using the fdt blob at 0x88000000
    Loading Device Tree to 000000008fee5000, end 000000008fffffff ... OK

    Starting kernel ...

    [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
    [ 0.000000] Linux version 5.10.41-g4c2eade9f7 (oe-user@oe-host) (aarch64-non1
    [ 0.000000] Machine model: Texas Instruments K3 J721E SoC
    [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
    [ 0.000000] printk: bootconsole [ns16550a0] enabled
    [ 0.000000] efi: UEFI not found.
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, B
    [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, B
    [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, B
    [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, B
    [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, B
    [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatibl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, B
    [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compl
    [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, B
    [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatibl
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
    [ 0.000000] DMA32 empty
    [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
    [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff]
    [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff]
    [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff]
    [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff]
    [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
    [ 0.000000] cma: Reserved 512 MiB at 0x00000000e0000000
    [ 0.000000] psci: probing for conduit method from DT.
    [ 0.000000] psci: PSCIv1.1 detected in firmware.
    [ 0.000000] psci: Using standard PSCI v0.2 function IDs
    [ 0.000000] psci: Trusted OS migration not required
    [ 0.000000] psci: SMC Calling Convention v1.2
    [ 0.000000] percpu: Embedded 2 pages/cpu s49880 r8192 d73000 u131072
    [ 0.000000] Detected PIPT I-cache on CPU0
    [ 0.000000] CPU features: detected: GIC system register CPU interface
    [ 0.000000] CPU features: detected: EL2 vector hardening
    [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
    [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65472
    [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmt
    [ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
    [ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes,)
    [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
    [ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e00000)
    [ 0.000000] Memory: 3372032K/4194304K available (10816K kernel code, 1344K r)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
    [ 0.000000] rcu: RCU event tracing is enabled.
    [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
    [ 0.000000] Trampoline variant of Tasks RCU enabled.
    [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
    [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
    [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
    [ 0.000000] GICv3: 960 SPIs implemented
    [ 0.000000] GICv3: 0 Extended SPIs implemented
    [ 0.000000] GICv3: Distributor has no Range Selector support
    [ 0.000000] GICv3: 16 PPIs implemented
    [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
    [ 0.000000] ITS [mem 0x01820000-0x0182ffff]
    [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
    [ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @880800000 (fl)
    [ 0.000000] ITS: using cache flushing for cmd queue
    [ 0.000000] GICv3: using LPI property table @0x00000008800b0000
    [ 0.000000] GIC: using cache flushing for LPI property table
    [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008800c000
    [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4d4 wi0
    [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
    [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
    [ 0.000002] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398s
    [ 0.008379] Console: colour dummy device 80x25
    [ 0.012940] Calibrating delay loop (skipped), value calculated using timer f)
    [ 0.023612] pid_max: default: 32768 minimum: 301
    [ 0.028357] LSM: Security Framework initializing
    [ 0.033101] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, lin)
    [ 0.040667] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes)
    [ 0.049609] rcu: Hierarchical SRCU implementation.
    [ 0.054659] Platform MSI: msi-controller@1820000 domain created
    [ 0.060892] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controllerd
    [ 0.070189] EFI services will not be available.
    [ 0.074936] smp: Bringing up secondary CPUs ...
    [ 0.080122] Detected PIPT I-cache on CPU1
    [ 0.080144] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
    [ 0.080155] GICv3: CPU1: using allocated LPI pending table @0x00000008800d000
    [ 0.080188] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
    [ 0.080238] smp: Brought up 1 node, 2 CPUs
    [ 0.109583] SMP: Total of 2 processors activated.
    [ 0.114389] CPU features: detected: 32-bit EL0 Support
    [ 0.119643] CPU features: detected: CRC32 instructions
    [ 0.133542] CPU: All CPU(s) started at EL2
    [ 0.137736] alternatives: patching kernel code
    [ 0.142723] devtmpfs: initialized
    [ 0.150953] KASLR disabled due to lack of seed
    [ 0.155605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
    [ 0.165569] futex hash table entries: 512 (order: -1, 32768 bytes, linear)
    [ 0.173243] pinctrl core: initialized pinctrl subsystem
    [ 0.178820] DMI not present or invalid.
    [ 0.183044] NET: Registered protocol family 16
    [ 0.190540] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
    [ 0.197839] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic alls
    [ 0.205843] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as
    [ 0.214147] thermal_sys: Registered thermal governor 'step_wise'
    [ 0.214150] thermal_sys: Registered thermal governor 'power_allocator'
    [ 0.220561] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
    [ 0.234202] ASID allocator initialised with 65536 entries
    [ 0.256959] HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages
    [ 0.263817] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
    [ 0.270575] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
    [ 0.278410] cryptd: max_cpu_qlen set to 1000
    [ 0.284358] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x1bbd
    [ 0.293200] vsys_3v3: supplied by evm_12v0
    [ 0.297516] vsys_5v0: supplied by evm_12v0
    [ 0.302149] iommu: Default domain type: Translated
    [ 0.307268] SCSI subsystem initialized
    [ 0.311403] mc: Linux media interface: v0.10
    [ 0.315774] videodev: Linux video capture interface: v2.00
    [ 0.321401] pps_core: LinuxPPS API ver. 1 registered
    [ 0.326471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
    [ 0.335808] PTP clock support registered
    [ 0.339827] EDAC MC: Ver: 3.0.0
    [ 0.343583] FPGA manager framework
    [ 0.347093] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.353699] clocksource: Switched to clocksource arch_sys_counter
    [ 0.360119] VFS: Disk quotas dquot_6.6.0
    [ 0.364161] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
    [ 0.373866] NET: Registered protocol family 2
    [ 0.378453] IP idents hash table entries: 65536 (order: 3, 524288 bytes, lin)
    [ 0.387043] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 655)
    [ 0.395820] TCP established hash table entries: 32768 (order: 2, 262144 byte)
    [ 0.404016] TCP bind hash table entries: 32768 (order: 3, 524288 bytes, line)
    [ 0.411947] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.418699] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear)
    [ 0.425593] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear)
    [ 0.432992] NET: Registered protocol family 1
    [ 0.437683] RPC: Registered named UNIX socket transport module.
    [ 0.443744] RPC: Registered udp transport module.
    [ 0.448548] RPC: Registered tcp transport module.
    [ 0.453351] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.459935] PCI: CLS 0 bytes, default 64
    [ 0.464284] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
    [ 0.474502] Initialise system trusted keyrings
    [ 0.479113] workingset: timestamp_bits=46 max_order=16 bucket_order=0
    [ 0.487350] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 0.493571] NFS: Registering the id_resolver key type
    [ 0.498786] Key type id_resolver registered
    [ 0.503058] Key type id_legacy registered
    [ 0.507176] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [ 0.514024] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registerin.
    [ 0.521661] 9p: Installing v9fs 9p2000 file system support
    [ 0.546783] Key type asymmetric registered
    [ 0.550968] Asymmetric key parser 'x509' registered
    [ 0.555967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
    [ 0.563525] io scheduler mq-deadline registered
    [ 0.568151] io scheduler kyber registered
    [ 0.573403] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
    [ 0.579571] pinctrl-single 11c000.pinctrl: 173 pins, size 692
    [ 0.587973] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
    [ 0.594247] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
    [ 0.602052] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
    [ 0.610114] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x0)
    [ 0.619078] arm-smmu-v3 36600000.iommu: allocated 524288 entries for cmdq
    [ 0.627911] arm-smmu-v3 36600000.iommu: allocated 524288 entries for evtq
    [ 0.635629] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to s
    [ 0.648535] brd: module loaded
    [ 0.654357] loop: module loaded
    [ 0.658172] megasas: 07.714.04.00-rc1
    [ 0.663087] libphy: Fixed MDIO Bus: probed
    [ 0.667721] tun: Universal TUN/TAP device driver, 1.6
    [ 0.673138] igbvf: Intel(R) Gigabit Virtual Function Network Driver
    [ 0.679543] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
    [ 0.685614] sky2: driver version 1.30
    [ 0.689869] VFIO - User Level meta-driver version: 0.3
    [ 0.695532] i2c /dev entries driver
    [ 0.699693] sdhci: Secure Digital Host Controller Interface driver
    [ 0.706011] sdhci: Copyright(c) Pierre Ossman
    [ 0.710695] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 0.717012] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.723334] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
    [ 0.730448] optee: probing for conduit method.
    [ 0.735006] optee: revision 3.12 (3d47a131)
    [ 0.735244] optee: initialized driver
    [ 0.744533] NET: Registered protocol family 17
    [ 0.749145] 9pnet: Installing 9P2000 support
    [ 0.753531] Key type dns_resolver registered
    [ 0.757976] Loading compiled-in X.509 certificates
    [ 0.767212] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
    [ 0.773541] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
    [ 0.781623] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0015 '21.5.0--v20)
    [ 0.807749] random: fast init done
    [ 0.833649] davinci-mcasp 2ba0000.mcasp: IRQ common not found
    [ 0.841098] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz
    [ 0.847195] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz
    [ 0.853238] omap_i2c 42120000.i2c: bus 2 rev0.12 at 100 kHz
    [ 0.859596] pca953x 3-0020: supply vcc not found, using dummy regulator
    [ 0.866413] pca953x 3-0020: using no AI
    [ 0.894461] pca953x 3-0022: supply vcc not found, using dummy regulator
    [ 0.901260] pca953x 3-0022: using AI
    [ 0.905546] gpio-480 (CTRL_PM_I2C_OE): hogged as output/high
    [ 0.911527] gpio-481 (MCASP/TRACE_MUX_S0): hogged as output/low
    [ 0.917774] gpio-482 (MCASP/TRACE_MUX_S1): hogged as output/high
    [ 0.924278] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz
    [ 0.930674] omap_i2c 2010000.i2c: bus 4 rev0.12 at 400 kHz
    [ 0.940380] omap_i2c 2020000.i2c: bus 5 rev0.12 at 400 kHz
    [ 0.946636] pca953x 6-0020: supply vcc not found, using dummy regulator
    [ 0.953451] pca953x 6-0020: using no AI
    [ 0.978362] omap_i2c 2030000.i2c: bus 6 rev0.12 at 400 kHz
    [ 0.984390] omap_i2c 2040000.i2c: bus 7 rev0.12 at 100 kHz
    [ 0.990317] omap_i2c 2050000.i2c: bus 8 rev0.12 at 100 kHz
    [ 0.996505] pca953x 9-0020: supply vcc not found, using dummy regulator
    [ 1.003317] pca953x 9-0020: using no AI
    [ 1.030295] omap_i2c 2060000.i2c: bus 9 rev0.12 at 400 kHz
    [ 1.036686] ti-sci-intr bus@100000:bus@28380000:interrupt-controller2: Interd
    [ 1.046647] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 1d
    [ 1.055453] ti-sci-intr bus@100000:main-navss:interrupt-controller1: Interrud
    [ 1.065273] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator d
    [ 1.084853] cdns-torrent-phy 5050000.serdes: 4 lanes, max bit rate 5.400 Gbps
    [ 1.092557] j721e-pcie 2900000.pcie: host bridge /bus@100000/pcie@2900000 ra:
    [ 1.100224] j721e-pcie 2900000.pcie: IO 0x0010001000..0x0010010fff -> 0
    [ 1.108500] j721e-pcie 2900000.pcie: MEM 0x0010011000..0x0017ffffff -> 0
    [ 1.116775] j721e-pcie 2900000.pcie: IB MEM 0x0000000000..0xffffffffffff -0
    [ 2.127126] j721e-pcie 2900000.pcie: PCI host bridge to bus 0000:00
    [ 2.133545] pci_bus 0000:00: root bus resource [bus 00-0f]
    [ 2.139151] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus addr)
    [ 2.148841] pci_bus 0000:00: root bus resource [mem 0x10011000-0x17ffffff]
    [ 2.155889] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400
    [ 2.162029] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 s
    [ 2.171898] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 s
    [ 2.181788] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xe8s
    [ 2.191749] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3es
    [ 2.201718] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x92s
    [ 2.211678] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xb2s
    [ 2.221662] pci 0000:00:00.0: supports D1
    [ 2.225756] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
    [ 2.231628] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x84s
    [ 2.243260] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
    [ 2.251448] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3es
    [ 2.261407] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3es
    [ 2.271365] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3es
    [ 2.282812] pci_bus 0000:01: busn_res: [bus 01-0f] end is updated to 01
    [ 2.289581] pci 0000:00:00.0: PCI bridge to [bus 01]
    [ 2.294849] pcieport 0000:00:00.0: PME: Signaling with IRQ 56
    [ 2.301166] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ra:
    [ 2.308834] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0
    [ 2.317112] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0
    [ 2.325389] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -0
    [ 2.435513] j721e-pcie 2910000.pcie: Link up
    [ 2.439927] j721e-pcie 2910000.pcie: PCI host bridge to bus 0001:00
    [ 2.446333] pci_bus 0001:00: root bus resource [bus 00-0f]
    [ 2.451938] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus ad)
    [ 2.461806] pci_bus 0001:00: root bus resource [mem 0x18011000-0x1fffffff]
    [ 2.468850] pci 0001:00:00.0: [104c:b00d] type 01 class 0x060400
    [ 2.475050] pci 0001:00:00.0: supports D1
    [ 2.479144] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
    [ 2.486643] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reg
    [ 2.494935] pci 0001:01:00.0: [104c:bd01] type 00 class 0x050000
    [ 2.501132] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000003ff]
    [ 2.507547] pci 0001:01:00.0: reg 0x14: [mem 0x00000000-0x000001ff]
    [ 2.513993] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x001fffff]
    [ 2.520406] pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x000fffff]
    [ 2.527164] pci 0001:01:00.0: supports D1
    [ 2.531257] pci 0001:01:00.0: PME# supported from D0 D1 D3hot
    [ 2.537198] pci 0001:01:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit]
    [ 2.544225] pci 0001:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 6)
    ERROR: Unhandled External Abort received on 0x80000001 from S-EL1
    ERROR: exception reason=0 syndrome=0xbf000000
    Unhandled Exception from EL1
    x0 = 0xffff800014960000
    x1 = 0x0000000000000000
    x2 = 0xffff800016400008
    x3 = 0x0000000000000001
    x4 = 0x000000000000000b
    x5 = 0xffff0008024a2000
    x6 = 0xffff800011bef864
    x7 = 0x000000000000ea60
    x8 = 0x0000000080b5111d
    x9 = 0x00000000b00d104c
    x10 = 0x7f7f7f7f7f7f7f7f
    x11 = 0x0101010101010101
    x12 = 0xffff00080056d326
    x13 = 0xffff00080056da1c
    x14 = 0xffffffffffffffff
    x15 = 0xffff000800312f30
    x16 = 0x0000000016a54dfe
    x17 = 0x0000000000000000
    x18 = 0x0000000000000000
    x19 = 0xffff800011bef7a4
    x20 = 0x0000000000000004
    x21 = 0xffff0008024a2800
    x22 = 0x0000000000000087
    x23 = 0xffff800011bef864
    x24 = 0x0000000000000001
    x25 = 0xffff8000112d3a88
    x26 = 0x0000000000000001
    x27 = 0x0000000000000000
    x28 = 0xffff0008024a2000
    x29 = 0xffff800011bef720
    x30 = 0xffff8000104ea30c
    scr_el3 = 0x000000000000073d
    sctlr_el3 = 0x0000000030cd183f
    cptr_el3 = 0x0000000000000000
    tcr_el3 = 0x0000000080803520
    daif = 0x00000000000002c0
    mair_el3 = 0x00000000004404ff
    spsr_el3 = 0x0000000020000085
    elr_el3 = 0xffff8000104ea324
    ttbr0_el3 = 0x0000000070010c00
    esr_el3 = 0x00000000bf000000
    far_el3 = 0x0000000000000000
    spsr_el1 = 0x0000000060000005
    elr_el1 = 0xffff8000100b2580
    spsr_abt = 0x0000000000000000
    spsr_und = 0x0000000000000000
    spsr_irq = 0x0000000000000000
    spsr_fiq = 0x0000000000000000
    sctlr_el1 = 0x0000000034d4d91d
    actlr_el1 = 0x0000000000000000
    cpacr_el1 = 0x0000000000300000
    csselr_el1 = 0x0000000000000000
    sp_el1 = 0xffff800011bef720
    esr_el1 = 0x0000000000000000
    ttbr0_el1 = 0x0000000083270000
    ttbr1_el1 = 0x0000000082f10000
    mair_el1 = 0x000c0400bb44ffff
    amair_el1 = 0x0000000000000000
    tcr_el1 = 0x00000034f5d07590
    tpidr_el1 = 0xffff80086ead0000
    tpidr_el0 = 0x0000000000000000
    tpidrro_el0 = 0x0000000000000000
    par_el1 = 0x0000000000000000
    mpidr_el1 = 0x0000000080000001
    afsr0_el1 = 0x0000000000000000
    afsr1_el1 = 0x0000000000000000
    contextidr_el1 = 0x0000000000000000
    vbar_el1 = 0xffff800010010800
    cntp_ctl_el0 = 0x0000000000000005
    cntp_cval_el0 = 0x000000005d2ffc61
    cntv_ctl_el0 = 0x0000000000000000
    cntv_cval_el0 = 0x0000000000000000
    cntkctl_el1 = 0x00000000000000d6
    sp_el0 = 0x000000007000abd0
    isr_el1 = 0x0000000000000040
    dacr32_el2 = 0x0000000000000000
    ifsr32_el2 = 0x0000000000000000
    cpuectlr_el1 = 0x0000001b00000040
    cpumerrsr_el1 = 0x0000000000000000
    l2merrsr_el1 = 0x0000000000000000

  • 0 in reply to Thomas Yang
    TI__Mastermind 23125 points

    Thomas, 

    Not sure if progress has been made on this test. It seems the EL1 exception was caused by access to one of PCIE address. This is typically caused by boot up sequence of the boards. please reply back if the issues still exists. 

    JIan