TDA3XEVM: ccs can't run gel normal

tim zhao

Part Number: TDA3XEVM

HI TI Support Teams

When we connected tda3x target board under ccs environment, M4 pc pointer to 0x4b4,

We don't know the root cause,please help us to clear it, thanks in advance.

0 Stanley Liu over 4 years ago

Hi,

Are you using TI EVM or custom board?

Which boot mode was configured when you tested this?

Regards,

Stanley

0 tim zhao over 4 years ago in reply to Stanley Liu

Hi Stanley

We use D3 starter kit board and our own board.

Boot mode is QSPI-4.

When the target board is connected, all gel files are initialized, there is no errors, but an error occurs in the load program.

0 Stanley Liu over 4 years ago in reply to tim zhao

D3 Starter Kit has different DDR than the one on EVM.

You need to update DDR configuration GEL file with the one from D3.

D3 Starter Kit should come with a SD card loaded with documentation, SW, and script from D3.

If you can't find it, please contact D3 to get a copy.

0 tim zhao over 4 years ago in reply to Stanley Liu

Hi Stanley

ok, thanks!

Processors forum