• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 268 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SK-TDA4VM: About the boot CPLD

SK-TDA4VM: about the net VIO_VIN

ruijie zhang
Prodigy 110 points

Part Number: SK-TDA4VM

in the SK-TDA4VM board schematics page 44,i found net VIO_VIN connect to VSYS_3V3 both through component Q1 and resistor R200.checked the board,found that R104 is no connect,R200 is paste on.if i design my SOC board,whether can i delete the MOSFET Q1?