TDA4VM: Kernal panic error while booting EVM.

Tanvi Gore

Intellectual 722 points

Part Number: TDA4VM

Hi Team,

I am trying to boot my board and run Vision apps as guided in "Vision apps User guide".

I am using SD-card for booting.

processor SDK is 07.03

attached is my complete log.

can you please tell me what is going wrong.

Thanks & Regards,

Tanvi N. Gore

kernelpanic_bootlog.txt

over 3 years ago

0 Lucas Weaver over 3 years ago

TI__Genius 13845 points

Hello,

Have you made any changes to the SDK or are you using the prebuilt SDK?

Regards,

Lucas

0 Tanvi Gore over 3 years ago in reply to Lucas Weaver

Intellectual 722 points

Hi Lucas,

No,it is freshly downloaded sdk.

I couldn't came across the

"[ 6.506081] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin--"

after preparing the SD-Card again with same sdk but I came across

"[ 59.590499] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: core_sys_select+0x4a8/0x4d0"

"[ 59.615245] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: core_sys_select+0x4a8/0x4d0 ]---"

attached is my log

after resetting the EVM the error got vanished.

can you please tell me the significance of "Kernel panic" and how to overcome?

Thanks & Regards,

Tanvi N. Gore

Fullscreen 7043.kernelpanic_bootlog.txt Download

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_ 
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org j7-evm ttyS2

Arago 2020.09 j7-evm ttyS2

j7-evm login: [   15.900386] usbcore: registered new interface driver usbfs
[   15.924842] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac started
[   15.935836] usbcore: registered new interface driver hub
[   15.942192] usbcore: registered new device driver usb
[   15.971189] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   15.976695] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
[   15.986255] xhci-hcd xhci-hcd.2.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000000000010010
[   16.002121] xhci-hcd xhci-hcd.2.auto: irq 601, io mem 0x06410000
[   16.014231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[   16.030090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.038111] usb usb1: Product: xHCI Host Controller
[   16.043046] usb usb1: Manufacturer: Linux 5.4.106-g023faefa70 xhci-hcd
[   16.050100] usb usb1: SerialNumber: xhci-hcd.2.auto
[   16.058237] hub 1-0:1.0: USB hub found
[   16.062000] hub 1-0:1.0: 1 port detected
[   16.070268] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   16.082093] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
[   16.089747] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[   16.102121] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   16.114139] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[   16.130088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.137299] usb usb2: Product: xHCI Host Controller
[   16.146090] usb usb2: Manufacturer: Linux 5.4.106-g023faefa70 xhci-hcd
[   16.152605] usb usb2: SerialNumber: xhci-hcd.2.auto
[   16.162298] hub 2-0:1.0: USB hub found
[   16.170091] hub 2-0:1.0: 1 port detected
[   16.406096] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   16.566359] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[   16.578087] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[   16.585212] usb 1-1: SerialNumber: CC0108697885
[   16.594578] hub 1-1:1.0: USB hub found
[   16.600482] hub 1-1:1.0: 4 ports detected
[   59.089945] Unable to handle kernel paging request at virtual address ffff840010a28100
[   59.097875] Unable to handle kernel paging request at virtual address fffffe0011008120
[   59.097879] Mem abort info:
[   59.105777] Mem abort info:
[   59.105778]   ESR = 0x96000006
[   59.105781]   EC = 0x25: DABT (current EL), IL = 32 bits
[   59.105782]   SET = 0, FnV = 0
[   59.105784]   EA = 0, S1PTW = 0
[   59.108567]   ESR = 0x96000005
[   59.111667] Data abort info:
[   59.114394]   EC = 0x25: DABT (current EL), IL = 32 bits
[   59.114396]   SET = 0, FnV = 0
[   59.114397]   EA = 0, S1PTW = 0
[   59.114399] Data abort info:
[   59.119823]   ISV = 0, ISS = 0x00000006
[   59.122737]   ISV = 0, ISS = 0x00000005
[   59.122738]   CM = 0, WnR = 0
[   59.122741] swapper pgtable: 64k pages, 48-bit VAs, pgdp=0000000082e10000
[   59.122743] [ffff840010a28100] pgd=0000000000000000, pud=0000000000000000
[   59.125998]   CM = 0, WnR = 0
[   59.128916] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[   59.131841] swapper pgtable: 64k pages, 48-bit VAs, pgdp=0000000082e10000
[   59.137074] Modules linked in: xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf rpmsg_char pru_rproc irq_pruss_intc icss_iep omap_rng6
[   59.141107] [fffffe0011008120] pgd=0000000083090003, pud=0000000083090003, pmd=0000000000000000
[   59.143250] CPU: 0 PID: 230 Comm: irqbalance Tainted: G           O      5.4.106-g023faefa70 #1
[   59.143251] Hardware name: Texas Instruments K3 J721E SoC (DT)
[   59.143254] pstate: 60000005 (nZCv daif -PAN -UAO)
[   59.143261] pc : proc_reg_open+0x58/0x160
[   59.143264] lr : do_dentry_open+0x110/0x3b0
[   59.143266] sp : ffff80001528fb40
[   59.273175] x29: ffff80001528fb40 x28: 00000000ffff8000 
[   59.278470] x27: 0000000000000000 x26: ffff80001528fd10 
[   59.283765] x25: 0000000000000000 x24: 000000000000416d 
[   59.289059] x23: ffff00084dc82010 x22: ffff00084dc82000 
[   59.294353] x21: 0000000000000000 x20: ffff00084ed2e9b8 
[   59.299647] x19: ffff000844396300 x18: 0000000000000000 
[   59.304940] x17: 0000000000000000 x16: 0000000000000000 
[   59.310234] x15: 0000000000000000 x14: 0000000000000000 
[   59.315529] x13: ffff00084bed4600 x12: 0000000000000000 
[   59.320823] x11: fefefefefefefeff x10: ffff000849cb24c0 
[   59.326117] x9 : 00000000427d6078 x8 : ffff00084dc82100 
[   59.331411] x7 : 0000000000000000 x6 : 0000000000000000 
[   59.336705] x5 : 0000000000000000 x4 : 0000000000000000 
[   59.341999] x3 : 0000000000000000 x2 : 0000000000000001 
[   59.347293] x1 : 0000000000000000 x0 : ffff840010a28080 
[   59.352587] Call trace:
[   59.355021]  proc_reg_open+0x58/0x160
[   59.358668]  do_dentry_open+0x110/0x3b0
[   59.362488]  vfs_open+0x28/0x30
[   59.365617]  path_openat+0x2c4/0x1130
[   59.369264]  do_filp_open+0x74/0xf8
[   59.372738]  do_sys_open+0x168/0x218
[   59.376299]  __arm64_sys_openat+0x20/0x28
[   59.380295]  el0_svc_common.constprop.0+0x68/0x160
[   59.385068]  el0_svc_handler+0x20/0x80
[   59.388803]  el0_svc+0x8/0x204
[   59.391846] Code: 14000248 6b00003f 540007e1 f9401a60 (f9404001) 
[   59.397922] ---[ end trace 1278d06d7ca9863a ]---
[   59.402524] Internal error: Oops: 96000006 [#2] PREEMPT SMP
[   59.408079] Modules linked in: xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf rpmsg_char pru_rproc irq_pruss_intc icss_iep omap_rng6
[   59.456393] CPU: 1 PID: 10 Comm: rcu_preempt Tainted: G      D    O      5.4.106-g023faefa70 #1
[   59.465067] Hardware name: Texas Instruments K3 J721E SoC (DT)
[   59.470880] pstate: 60000005 (nZCv daif -PAN -UAO)
[   59.475658] pc : rcu_gp_kthread+0x3d0/0x8b8
[   59.479825] lr : rcu_gp_kthread+0x294/0x8b8
[   59.483992] sp : ffff8000113efdb0
[   59.487291] x29: ffff8000113efdb0 x28: ffff80001100b700 
[   59.492584] x27: 0000000000000000 x26: 0000000000000000 
[   59.497878] x25: ffff80001100b900 x24: 0000000000000001 
[   59.503171] x23: ffff8000110ea190 x22: ffff0008401b7e00 
[   59.508466] x21: ffff800010ff39ac x20: ffff80001100d700 
[   59.513759] x19: ffff800010ff1980 x18: 0000000000000000 
[   59.519051] x17: 0000000000000000 x16: 0000000000000000 
[   59.524344] x15: 0000000000000000 x14: 0000000000000000 
[   59.529637] x13: 0000000000000000 x12: 0000000000000001 
[   59.534930] x11: 0000000000000000 x10: 00000000000009e0 
[   59.540225] x9 : ffff8000113efce0 x8 : ffff0008401b8840 
[   59.545518] x7 : ffff00087faaac40 x6 : ffff00087faaabc0 
[   59.550811] x5 : 0000000000000000 x4 : 0000000000000001 
[   59.556104] x3 : 0000000000000000 x2 : 0000000000000f15 
[   59.561397] x1 : 00000000ffff14aa x0 : fffffe0011008080 
[   59.566691] Call trace:
[   59.569125]  rcu_gp_kthread+0x3d0/0x8b8
[   59.572947]  kthread+0x138/0x158
[   59.576161]  ret_from_fork+0x10/0x1c
[   59.579723] Code: 9102a3e0 f9003fe0 f9403be0 52800038 (f9405000) 
[   59.585797] ---[ end trace 1278d06d7ca9863b ]---
[   59.590499] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: core_sys_select+0x4a8/0x4d0
[   59.600825] SMP: stopping secondary CPUs
[   59.604735] Kernel Offset: disabled
[   59.608208] CPU features: 0x0002,20006008
[   59.612201] Memory Limit: none
[   59.615245] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: core_sys_select+0x4a8/0x4d0 ]---