CPU Load Graph

dinesh babu

Prodigy 20 points

Hi ,

I am not able to see the CPU Load graph in my CCS ( only blank screen ). Kindly help me to solve this problem.

The following version and configuration have been used

1.CCS version 3.3.67

2.BIOS:5.32.03

3.Code Generation tools:V6.0.8

I have treid in both the continuous and non-continuous mode

In the both the cases the results are same. But i can able to see the execution graph after halting but not the Exection graph

For the non-continuous mode , the file is not updated with any content

over 14 years ago

0 AartiG over 14 years ago

TI__Guru**** 173310 points

Have you checked this BIOS RTA troubleshooting page: http://processors.wiki.ti.com/index.php?title=DSP/BIOS_Real-time_Analysis_(RTA)_troubleshooting

What target device are you running on? Are you running one of the BIOS examples or your own custom project? If you have not tried the examples yet, that might be a good strating point to see if the CPU load graph works well with the examples.

I will move this post to the BIOS forum so the experts there can provide additional comments.

Processors

Processors forum

CPU Load Graph