PROCESSOR-SDK-J7200: Does J7200EVM support MCUSS demo "Mode Switch Application"?

Dejin ZHENG

Hi TI,

We want to test mcu-only mode on J7200EVM.

Does J7200EVM support the MCUSS demo "Mode Switch Application"?

(reference link: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j7200/08_01_00_11/exports/docs/mcusw/mcal_drv/docs/drv_docs/demo_mode_switch_top.html)

Thanks.

over 4 years ago

0 Karan Saxena over 4 years ago

TI__Guru* 78035 points

Hi,

The Mode Switch Application or the MCU only mode demo is not supported on J7200.

Regards

Karan

0 Dejin ZHENG over 4 years ago in reply to Karan Saxena

Prodigy 60 points

The reason of "not supported on J7200" is PMIC different between J7200 EVM and J721E EVM?

Maybe this demo can run normally on J7200 after adapt the PMIC related code?

+1 Karan Saxena over 4 years ago in reply to Dejin ZHENG

TI__Guru* 78035 points

Hi,

Dejin ZHENG said:
The reason of "not supported on J7200" is PMIC different between J7200 EVM and J721E EVM?

That is correct, the J7200 EVM has a different PMIC than the J721E EVM, the functions in pdk/packages/ti/drv/lpm/src/lpm_pmic.c need to be adapted for the PMIC change.

Regards

Karan

Processors

Processors forum

PROCESSOR-SDK-J7200: Does J7200EVM support MCUSS demo "Mode Switch Application"?