• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCSTUDIO: DSP support

May
Genius 9880 points
Part Number: CCSTUDIO
Other Parts Discussed in Thread: AM3352

Hi,

Customer have questions regarding the CCS11, please see details below.

"

I need some assistance with JTAG and CCS 11. Error initializing emulator: (Error -2083 @ 0x0) Unable to communicate with the debug probe. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 9.5.0.00143)

With CCS 11, is the EmuPack with XDS100v3 support already installed and DSP support ?  I just did a re-install of CCS11 to see if there were any unmarked boxes I did not check.  attached is a screenshot of the .conf test for the AM3352

"

Customer also visited and reviewed the discussion in following link: http://software-dl.ti.com/ccs/esd/documents/ccs_debugging_jtag_connectivity_issues.html#host-connection-error

Thank you in advance.

Regards,
Maynard