• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 572 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM6442: SysConfig file for AM64 SK

Robert Finger
Genius 17367 points
Part Number: AM6442
Other Parts Discussed in Thread: SYSCONFIG

Team, 

Do we have the SysConfig configuration file available which was used for our SDK? Would be good to have this on the SK product page!

This is one of the gernated files:
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/arch/arm/dts/k3-am64-sk-lp4-1333MTs.dtsi

Thanks,
  Robert

  • 0
    TI__Guru* 85960 points

    Robert, the sysconfig tool at dev.ti.com defaults to the TI board configurations.  So if you choose LPDDR4, the default values will be for the SK board running DDR at 800MHz.  Note that there was some recent optimizations (v8.4 of the tool) to the configuration for the boards (and applicable for customer designs).  These optimizations allowed for more stable operation at 1600MTs

    A SysConfig configuration file will only contain the delta from that default configuration if you happen to tweak it for custom boards.

    Regards,

    James