• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 100 subscribers
  • Views 480 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: How to develop PHY driver under QNX?

SandalHao
Intellectual 665 points
Part Number: TDA4VM

In the QNX driver code eg \psdkqa\qnx\devnp\src\enetlld_if.c I found that PHY initialization and related operations are realized by using the phy relevant interface of PDK.

I don't know whether it is correct. I'd like to consult Ti experts.

Thanks!

  • +1
    TI__Guru** 110211 points

    Hi,

    Yes, the A72 based CPSW QNX drivers included in PSDK QNX delivery from TI, re-use the PDK source code with minor modifications. 

    Any PDK documentation, support questions,  regarding PHY can be applied to the QNX drivers as well.

    Regards,

    kb