Regarding EVM5515 hardware problems???????????

srikanth cheruku

Other Parts Discussed in Thread: TMS320C5515

hai every one.........

Internal rtc is not working. i just written code for rtc it was not displaying any thing on the lcd, and even tried demo code and csl code, the problem is same.. can any one help me out from this problem..........

may be i am thinking my IC(tms320c5515) is not working...........

how to check that one whether it is working are not...............

can any one give suggestion for this............

over 14 years ago

0 Steve Tsang over 14 years ago

TI__Mastermind 23785 points

Since you are using C5515 EVM, the CSL example code must work. If not, i would suggest try another EVM; try other CSL example codes to verify your JTAG connection and your IC.

0 srikanth cheruku over 14 years ago in reply to Steve Tsang

Prodigy 70 points

hai steve,

thank tou for your repaly....... but the problam is i dont have another evm board to check.....

0 Steve Tsang over 14 years ago in reply to srikanth cheruku

TI__Mastermind 23785 points

Can you run other CSL example?

0 srikanth cheruku over 14 years ago in reply to Steve Tsang

Prodigy 70 points

hai steve,

i tried other CSL examples i.e uart, spi ,external rtc code............. but the problem is same it was not displaying any thing , and it was not transming any thing.......

0 Steve Tsang over 14 years ago in reply to srikanth cheruku

TI__Mastermind 23785 points

When you ran other CSL examples i.e, UART, SPI .... Do those test pass? This is to confirm your JTAG, CCS and HW work. Not your LCD display.

Regards.

Processors

Processors forum

Regarding EVM5515 hardware problems???????????