tms320c5515 eZdsp USB stick

Talmor,

You should be able to use CCS3.3, you can find the gel file at - http://support.spectrumdigital.com/boards/usbstk5515/reva/,

BR,

HR

which platform should I use in the code composer setup? which gel file?

Talmor,

OK, CCS3.3 does not support the XDS100 for the C55x so you should use CCS4.0 or you can use CCS3.3 with an external Jtag,

BR,

HR

THANKS

I foilowed the "TMS320c5515 eZdsp Stick Quick Start Guide" step by step , trying to run the LED Blink demonstration program.

after building the [project led.out is generated but the "Load Program" option is still in gray (the same goes for the Target->run option).

need your help.

So, which CCS are you using now? The EZDSP will work with CCS4.x directly. But if you installed the 3.x before, make sure you have a clean installation for 4.x. because the environments are very different.

Wen

curly I'm using ccv4.1 for eZdsp but I'm also running ccs3.3 on my PC since I'm using it for EVM5515.

can I run both CCS3.3 and CCS4.1 on the same PC ?

Yes, you can,

HR

Talmor,

    Are you able to connect to the ezdsp with CCS 4.1 (connect to target) ?

Thanks,

Seb

yes Thanks