I cannot Linux boot logo when booting Linux on Overo Fire

Thalib

Other Parts Discussed in Thread: OMAP3530

Hi,

I am using Overo Fire com. I have enabled boot logo in kernel config.

I cannot Linx boot logo when booting Linux on Overo Fire com

Is boot logo not supported in OMAP3530?

Regards,

Mohamed Thalib .H

0 Sanjeev Premi over 14 years ago

The boot logo is a feature supported by the software. Do you need boot logo in u-boot or Linux kernel?

EDIT: I did notice this post on linux-omap:

Hope it has helped you get the logo on your Overo board.

0 Thalib over 14 years ago in reply to Sanjeev Premi

Hi Sanjeev,

It is exactly me..

I am able to get the boot log in the Linux kernel. My requirement it to get logo as early as possible.

So I tried the boot logo at u-boot level. But couldn't get it at u-boot level. If you have any information or patch please pass it on.

Regards,

Mohamed Thalib H.

Processors forum