• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 100 subscribers
  • Views 237 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4 RTOS0801 camera demo app issue

xu ji
Intellectual 335 points

Hello,

When I use TDA4 RTOS 0801 release run single_cam app and multi_cam app demo with camera connect to CSI_1 des,

What need to modify with these apps to get CSI_1 channel image data?I think the default to get CSI_0 channel.

And how about the single_cam app "Select camera port index 0-7",how to set this option?

 

Thanks

  • +1
    TI__Guru* 81856 points

    Hi,

    The single cam & multi cam demos supports input from camera connected to CSI_1.
    For single cam, during  "Select camera port index 0-7", 0,1,2,3 are for cameras in CSI_0 and 4,5,6,7 are for cameras in CSI_1.
    For multi-cam you'll have to change the channel mask accordingly 

    Regards,
    Nikhil