how to boot through nand flash:

vigneshwaran sekar

Other Parts Discussed in Thread: TMS320DM365

hello all,

we are trying to boot the NAND flash(board) .

With the sd card its working fine no problem it works fine ,but

when we try to run without sd card its not working even the board does not booting ,

can any one suggest how to boot through board nand flash ?

waiting

0 Sanjeev Premi over 14 years ago

1) Which board are you using?

2) Have you ensured that switch settings (if applicable) are right to make the board boot from NAND?

3) Have you flashed right set of boot-loader(s) and kernel in the flash?

0 vigneshwaran sekar over 14 years ago in reply to Sanjeev Premi

we are using tms320dm365 evm,

we set the switch sw4 010 (btsel) for sd card working fine in NFS boot,

while we set sw4 000 and without sd card board doesnt boot, it shows nothing .

we followed http://processors.wiki.ti.com/index.php/GSG:_DM365_DVEVM_Additional_Procedures#Restoring_the_NAND_Flash

could you help me what things we should do?

0 Sanjeev Premi over 14 years ago in reply to vigneshwaran sekar

I don't have any experience with this board, but a log of steps are you are doing will be useful.

Processors forum