Compaitbility with existing CCS v4 Microcontrollers edition

Wayne Duquaine

Srik:

I recently installed CCS v4 for Microcontrollers (MSP430/C2000) and its license.

Will adding the CCS v4 for the C550x ezDSP Control Stick disrupt this, or will they co-exist side by each ?

Also, does the CCS v4 for the C550x ezDSP Control Stick have any max code size or time limit issues, or is it locked to the board and give full capability ?

over 16 years ago

0 Vishal Markandey over 16 years ago

TI__Intellectual 2530 points

Wayne,

Multiple installs is not an issue. Also it is not a code size limited version. Instructions for activating your license are included in the Quick Start Guide that is provided with the eZdsp stick.

In case you have not seen it here is a site with details on CCSv4

http://tiexpressdsp.com/index.php/Category:Code_Composer_Studio_v4

Best regards, Vishal

0 TommyG over 16 years ago in reply to Vishal Markandey

TI__Genius 13045 points

Wayne,

Just a little follow-up to Vishal's response. This only limitation with version of CCSv4 that comes with the eZdsp Stick is that it is targetted at the new XDS100 emulator technology that TI just released. The XDS100 emulator is embedded into the eZdsp Stick.

Regards.

Processors

Processors forum

Compaitbility with existing CCS v4 Microcontrollers edition