AM6548: Using CAN and CAN FD on RTOS

Daisuke Maeda

Guru 20425 points

Part Number: AM6548

Does the Processor SDK RTOS support CAN and CAN FD?

There is no mention of CAN in the latest Processor SDK RTOS (08.02.00.05) documentation.

software-dl.ti.com/.../index_modules_am65xx.html

Best regards,

Daisuke

over 4 years ago

+1 Jianzhong Xu over 4 years ago

TI__Guru 62460 points

Hi Daisuke,

Please look at the AM65x build sheet: https://www.ti.com/tool/PROCESSOR-SDK-AM65X -> Click "Download options" for PROCESSOR-SDK-RTOS-AM65X — RTOS Processor SDK for AM65x, then find AM65x_BuildSheet.xlsx.

According to this build sheet, CAN and CANFD are supported by the RTOS SDK

Regards,

Jianzhong

0 Daisuke Maeda over 4 years ago in reply to Jianzhong Xu

Guru 20425 points

Hi Jianzhong-san,

Thank you for your reply.

Is there documentation for the MCAN module in the Processor SDK RTOS?

Best regards,

Daisuke

+1 Jianzhong Xu over 4 years ago in reply to Daisuke Maeda

TI__Guru 62460 points

Hi Daisuke-san,

There is no documentation on the MCAN module. You can refer to the CSL unit test code at: ti-processor-sdk-rtos-am65xx-evm-08_02_00_05\pdk_am65xx_08_02_00_21\packages\ti\csl\test\mcanUt.

Regards,

Jianzhong

0 Daisuke Maeda over 4 years ago in reply to Jianzhong Xu

Guru 20425 points

Hi Jianzhong-san,

Thank you for your reply.

We would appreciate it if you could update the documentation for the MCAN module.

Best regards,

Daisuke

Processors

Processors forum

AM6548: Using CAN and CAN FD on RTOS