Hi
My customer is asking about "Int Number 127" Interruption, why this is happend? and let us know how to address not be happend.
they have already checked errata (sprz360i.pdf) but not description about this.
Best Regards, ny
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
My customer is asking about "Int Number 127" Interruption, why this is happend? and let us know how to address not be happend.
they have already checked errata (sprz360i.pdf) but not description about this.
Best Regards, ny
Hello N.Y
Thank you for the query.
Let me work to reassign to the expert. Please expect some delay..
Regards,
Sreenivasa
Hi NY,
What OS is running on AM3352, which version?
Please provide the relevant console log.
Hi NY,
Thanks for sharing the console log offline. I see the following message in the log:
Default Interrupt Handler: Unregistered interrupt occurred
But I am unable to locate this message in the Linux kernel source code, so I don't think this message was printed from kernel. Again, what OS is running on AM3352, which version?
Hi NY,
According to AM335x TRM, interrupt number 127 is reserved and you shouldn't receive this interrupt. I would recommend your customer to narrow down the problem and find out which component in their system caused this log: "Default Interrupt Handler: Unregistered interrupt occurred". They can start with no interrupts configured and add interrupt one by one until this log appeared.
Regards,
Jianzhong
Close this one as the discussion continues in another thread: (2) AM3352: After setting INTC_THRESHOLD, is it correct to understand that it is necessary to write 1 to Bit0 (NewIRQAgr) of INTC_CONTROL? - Processors forum - Processors - TI E2E support forums