sourcecode of RBLs (ROM Bootloaders) for AM1808

Fly58715

Other Parts Discussed in Thread: AM1808

Dear Jeff:

where can we find the sourcecode of RBL for AM1808?thanks!

0 jc-ti over 14 years ago

Hi Fly, this is not generally released for any TI products. If you have any specific questions about its functionality you can ask here.

Jeff

0 vaishnav . over 13 years ago in reply to jc-ti

I am working with the AM1808 processor. In the uart boot mode, is the "boot me" command sent by the RBL.

In other boot modes, what are the signs of rbl booting up(i.e procedures performed by the rbl which are visible outside).

0 jc-ti over 13 years ago in reply to vaishnav .

For the master boot modes, usually it will be a chip select toggling (SPI, NAND, NOR). For MMCSD and I2C master boot, it would be the clock toggling.

For slave boot modes, there may not be any activity visible from the outside, as they wait for the master to initiate communication.

Jeff

Processors forum