boot a C5504 DSP from an MMC/SD

Talmor,

This page on our Wiki gives you the information you need: 

Creating Boot-Images

Regards,

Juliana Almeida

Thanks again ;-)

more information about Boot-Images you can find in the following threads:

http://e2e.ti.com/support/dsp/tms320c5000_power-efficient_dsps/f/109/p/111745/398022.aspx#398022

and in the WiKi pages:

http://processors.wiki.ti.com/index.php/C5515_Boot-Image_Programmer

Shai A

Thanks

Hi.

1 Is the secure boot  image for boot from CD_card the same to we use for boot from USB?

2 we use SecureBootImageTool-2.0-Setup. I make secure image and it work via USB loader then using on PC usb_boot.exe,

but can not boot from CD_card.

2.1Is it the same secure key settings for CD and USB? 

2.2 CD card must be formatted in FAT32?

2.3 I can to place boot image on CD_card using card reader on PC?

3. I try programmer.out  from EVM5505_BSL_revd.zip packet to write image on CD Card.

It can open file, but can not write on CD card - give create() error. The card was formatted for all possible for Win XP formates.

CD test from lib 5515ezdsp was work.

3.1 may be boot from CD have to use other file system not Fat32?

3  How can we find  Version 1.00 of C55BootImage.exe 

Hi Evgeniy,

1) The secure boot images are all the same for MMC/SD cards and USB.

Is there an email I can contact you regarding this issue?

Regards,

Juliana Almeida

Hi, Juliana.

I was sent to you mail on: