Information about TMDXEVMPCI :- AMC to PCIe Adapter Card

Shantanu,

The schematic for the TMDXEVMPCI adaptor is not currently available, but should be available in the near future.

Regards,

Derek

Hi Derek,

                  Thanks for the response. Will it be possible to get the pinout details . I wanted to check if the PCIe Tx and Rx lanes are swapped on this board .

Regards,

Shantanu Bhaduri

There is no lane swapping.  The prototypes are functional without any lane configuration changes.

Tom

Hi Tom,

                 If my understanding of lane swapping is correct, then in a x4 slot , lane swapping means lane 0 is connected to lane 3 of PCIe add in card , lane 1 to lane 2 and so on ...It is perfectly fine if lane swapping is not done. But my question is about differential Tx and Rx swapping for a lane .

According to PCIe specification the PERpx and PERnx ( the Receive Differential pair of the connector) shall be connected to PCIe Transmitter differential pair on the add-in card. Is this taken care in the TMDXEEVMPCI Adaptor card ?

Regards,

Shantanu Bhaduri

Hi Shantanu,

Please visit  Support /Download option provided at below link to get schematic (in pdf format) and other technical documents.

http://www.einfochips.com/TI-TMDXEVMPCI.php

Regards,

Kartik Gandhi