Part Number: SK-AM64
We are trying the tisdk-default-image-am64xx-evm.wic.xz version 08.04.01.04 on the eval board AM64-SK. We use Balena Etcher to flash on the sd-card.
Note that the board is running with previous version. This is reproducible on a second board. We get following error:
U-Boot SPL 2021.01-g2dd2e1d366 (Sep 28 2022 - 04:41:26 +0000)
EEPROM not available at 80, trying to read at 81
k3_system_controller sysctrler: k3_sysctrler_start: Boot Notification response failed. ret = -110
Firmware init failed on rproc (-110)
resetting ...
ti_sci dmsc@44043000: ti_sci_get_response: Message receive failed. ret = -110
ti_sci dmsc@44043000: ti_sci_get_response: Message receive failed. ret = -110
ti_sci dmsc@44043000: ti_sci_get_response: Message receive failed. ret = -110
System reset not supported on this platform
### ERROR ### Please RESET the board ###
