SK-AM62: Camera module/board supported with SK-AM62

Hello Gireesh,

Following 2 CSI camera modules have been tested with the SK-AM62 board. Both work fine.

1. ALINX AN5641
2. TEVI-OV5640C

The default clock frequency for TEVI-OV5640C is 24MHz according to the camera spec. You'll need to modify the device tree overlay and set clock-frequency to <24000000>:

https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/arch/arm64/boot/dts/ti/k3-am625-sk-csi2-ov5640.dts?h=ti-linux-5.10.y#n19

For ALINX AN5641, you can use the existing ov5640 DT overlay as is.

Please refer to the AM62x Linux Academy, specifically the following chapters, for how to use the CSI cameras with the SK-AM62 board:

• Evaluating camera
• Using camera