Dear Champs,
My customer is designing TDA3 HW and wants to check if it is OK to use one 1.8V power to all below VDDA_1.8V or should all blocks be separated using BEAD.
When they are trying to use separated power for each VDDA_1.8V using BEAD, they found so many separated POWER SHAPE in their HW design.
Please check and let me know if one 1.8V power can be used to all below VDDA_1.8Vs - vdda_adc, vdda_csi, vdda_dac, vdda_ddr_dsp, and so on.
Thanks and Best Regards,
SI.