AM5706: Inquiry about USB2.0 Host compliance test

Takayuki Miyazaki

Part Number: AM5706
Other Parts Discussed in Thread: TDA4VM

Hi team,

I received the inquiry about USB2.0 Host compliance test. Customer is asking how to do USN2.0 Host compliance test with AM5706BCBDJ. Customer was looking into those information, however, they were not able to find it. Is there any helpful URL/document ?

It will be appreciated if your experts will be able to share advice/comments on this inquiry.

Customer has “Compliance Test Fixture Type3” and “Tektronix DPO7254”.

Best regards,

Miyazaki

over 2 years ago

0 Takayuki Miyazaki over 2 years ago

TI__Genius 10120 points

Hi Experts,

Can I have any adivice/comments on customer's inquiry, please?

Best regards,

Miyazaki

0 Takayuki Miyazaki over 2 years ago in reply to Takayuki Miyazaki

TI__Genius 10120 points

Hi Experts,

I'm sorry to rush you, but, it is really appreciated if you will share any advice/comments on this inquiry because customer is waiting for Expert's feedback for one week.

Best regards,

Miyazaki

0 Takayuki Miyazaki over 2 years ago in reply to Takayuki Miyazaki

TI__Genius 10120 points

Hi Experts,

Can I have any adivice/comments on customer's inquiry, please?

Best regards,

Miyazaki

0 Takayuki Miyazaki over 2 years ago in reply to Takayuki Miyazaki

TI__Genius 10120 points

Hi Experts,

Can I have any adivice/comments on customer's inquiry, please?

We were not able to receive any feedback for two weeks.

Best regards,

Miyazaki

0 Takayuki Miyazaki over 2 years ago in reply to Takayuki Miyazaki

TI__Genius 10120 points

I shared the following SDK user's gude "3.3.3.23 USB DWC3" with our customer.

https://software-dl.ti.com/processor-sdk-linux/esd/AM57X/08_02_01_00/exports/docs/linux/Foundational_Components/Kernel/Kernel_Drivers/USB/DWC3.html

Best regards,

Miyazaki

0 ShreyasRao over 2 years ago in reply to Takayuki Miyazaki

TI__Guru 62170 points

Takayuki,

I have not had direct experience validating the AM5706, however, for the USB 2.0 host mode compliance for TDA4VM, I use the EVM and set the linux command as below:

devmem2 0x06010480 w 0x000000A0;devmem2 0x06010080 w 0x00000004;devmem2 0x06010484 w 0x40000000

this is as per the USB0_VBP2APB_WRAP_CONTROLLER_VBP_CORE_ADDR_MAP.

The link you have shared seems to be appropriate for USB 3.0 and 2.0 compliance testing.

Processors

Processors forum

AM5706: Inquiry about USB2.0 Host compliance test