TDA4VM: Supported image sensors in PSDKL

Hi,

From the linux end, we have successfully tested imx390, imx219 and ov5640 with CSI-rx linux driver.

You could find the other sensors that could be supported in the link below if it is compatible with the hardware, but we have tested only the above 3 sensors currently.
https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/i2c/

Regarding adding any new sensor or serdes, you could refer/modify our current serdes drivers or sensor drivers as all the information is available as open source 

Please find the driver information below

CDNS CSI2RX driver: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/platform/cadence/cdns-csi2rx.c?h=ti-linux-5.10.y

DMA Wrapper: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c?h=ti-linux-5.10.y

Reference for Sensor Driver: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/i2c/imx390.c?h=ti-linux-5.10.y

Reference for Deserializer driver: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/i2c/ds90ub960.c?h=ti-linux-5.10.y

Reference for Serializer driver: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/i2c/ds90ub953.c?h=ti-linux-5.10.y

Please let me know if this answers your query.

Regards,
Nikhil

Hi Nikhil,

That's wonderful! Thanks for your infomation! I'll check them.