• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 201 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Not able to boot

Srikanth HV
Prodigy 140 points
Other Parts Discussed in Thread: AM3517

Hi,

 I am using AM3517. I am not able to boot. and I have tested NAND and DDR2 interfaces.

Now trying to boot from the NAND. I have loaded x-loader to 0x0 loaction and u-boot to 0x80000 location. When I try to boot nothing is displaying in the serial console.

and boot sequence is proper. 

Am I rite in loading the files to proper memory location. Please correct me if i am doing wrong.

 

Regards,

Srikanth

  • 0
    TI__Expert 6735 points

    Srikanth:

    Is this a custom board or TI AM3517EVM?   Do you have the same SDRAM and NAND devices as the EVM?

    Sysboot settings?   u-boot parameters (output from printenv command)?

    What software versions are you using (x-loader, u-boot, kernel)?  Can system boot from SD/MMC interface?

    What did you use to program NAND flash?

    Regards,

    Michael T