• Locked Locked
  • Replies 3 replies
  • Subscribers 98 subscribers
  • Views 479 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6452 EVM

adnan khurshid
Intellectual 255 points

Other Parts Discussed in Thread: TMS320C6452

hello all,

   can any one plz send me the block diagram of TMS320C6452. also i want to know that for full duplex communication, will both rj45 works in parallel or not?

   is there two MAC controller IC's?

waiting for reply...

regards

adnan khurshid

  • TI__Prodigy 720 points

    The functional block diagrams are now available on the product folders as a graphic.  Just click to enlarge.  The detailed diagram is in the datasheet and both are located here  http://focus.ti.com/docs/prod/folders/print/tms320c6452.html

    I am unable to answer your other questions, perhaps another community member may be able to jump in.

    Mike

     

  • TI__Mastermind 18130 points

    adnan khurshid said:

       can any one plz send me the block diagram of TMS320C6452. also i want to know that for full duplex communication, will both rj45 works in parallel or not?

       is there two MAC controller IC's?

    The C6452 EVM includes two separate PHYs meaning that both ports can be used independently. I believe that the NDK (TCP/IP Stack) v2.0 and above will provide the software support for operating both simultaneously.

  • in reply to TimHarron
    Intellectual 255 points

    hello Tim; can you plz help me in finding the exact location or say function in the ndk example helloworld under evm648 folder. i have spent lot of time on it, i have seen packet buffer addresses  but i want to change them and then transmit through LAN. i am recieving LAN packets through ethernet ports.

    regards

    adnan