TDA4VM: TDA4VM EVM OSPI boot

Rio Chan

Genius 14895 points

Part Number: TDA4VM
Other Parts Discussed in Thread: DRA829

Hi Champs:

To boot the OSPI flash on the TDA4VM EVM, which boot mode needs to be set?

I know this:

TDA4 / DRA829 / J721E is using QSPI for adapting the Micro flash: MT25QU512ABB8E12-0SIT.

So, to boot the TDA4 OSPI needs to set the boot mode as "Q"SPI?

Please confirm. thanks.

BR Rio

0 Keerthy J over 2 years ago

Hi Rio,

On TDA4 EVM for OSPI Boot is supported:

Dip switch settings:

SW8: 0000 0000
SW9: 0100 0000

Please follow the below link for instructions on flashing to OSPI: https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-jacinto7/08_04_00_11/exports/docs/linux/Foundational_Components/U-Boot/UG-QSPI.html

Best Regards,
Keerthy

0 Rio Chan over 2 years ago in reply to Keerthy J

Hi Keerthy:

Thanks, I will close this.

BR Rio

Processors forum