TDA4VM: How to setup MCU1_0 develop environment for TDA4VL

Hi,

What is your use case here. There are different components available based on your needs. Please find the details of each of these components https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/08_02_00_05/exports/docs/psdk_rtos/docs/user_guide/sdk_components_j721e.html

Regards,
Parth

Hi expert，

  I focus on mcusw component. In TDA4VM SDK, boot mode is SBL,my working path is mcusw,the debug UART  log print normality. While change to TDA4VL SDK, the boot mode is SPL, I compile demo app under the mcusw path by the same way,but the UART print nothing out. How can I print the debug log by UART port?

 In fact，I need the first demo app that is working on MCU1_0.

Hi Parth,

 As customer's words, they meet a problem on TDA4VL SDK, which the default bootflow is SPL, but it is not output any log of MCU1_0, they want to know how to develop the MCU SW. We see some demos source code at appfs/mcusw, but they are not support build for TDA4VL , so could you give us some tips on this problem.

Regards,

Cary 

Hello,

The TDA4VM SDK should be the same, if you download the RTOS SDK you should see the same file structure. When you build the MCUSW example you want to try, follow the same steps to setup an SD card for SBL boot (tiboot3.bin and tifs.bin and your appimage). It should run similarly. Have you downloaded the J721S2 SDK from SecureSW?

Regards,

Erick