Problem while running dm6437_demo

cang_rong

Prodigy 130 points

Other Parts Discussed in Thread: CCSTUDIO

Dear Sir, my DM6437EVM is well but I have one problem with dm6437_demo.

I installed CCStudio3.3.38.2, DM6437_DVDP_setupwin32_1_00_00_19.exe and TDS6437EVMboards_setup.exe all at C：，

configured Setup CCStudio v3.3 and open CCStudio3.3. File->Load Program->dm6437_demo, display at screen is shaking!

Shaking! Why!

over 16 years ago

Brad Griffis over 16 years ago

TI__Guru*** 125430 points

You should get the latest software here:

https://www-a.ti.com/extranet/cm/product/dvevmsw/dspswext/general/homepage.shtml

Perhaps one of the bug-fixes is related.

Also, you might try doing Debug -> Run Free in CCS as sometimes that can help.

Brad

Bernie Thompson TI over 16 years ago

TI__Mastermind 41665 points

Just a guess, but this could be a video format issue, you may want to check that the board is set to your standard, NTSC or PAL, through jumper JP1, I know NTSC looks weird on a PAL display though I am not sure shaking is how I would describe it.

cang_rong over 16 years ago in reply to Brad Griffis

Prodigy 130 points

Thank you! I am so sorry for my poor English!

This problem was solved, it was avoid accurately. I reset the EVM board and connect the CCStudio with EVM board when the display was bule.

Everything is well now! I still do not know why shaking!

Processors

Processors forum

Problem while running dm6437_demo