AM625: AM625

jack wang

Part Number: AM625

Dear Expert ,

I used FT234XD ( USB to UART IC) and my terminal UART was set on MCU_UART0 , however , it didn't work . Can you tell me how to set the port ?Please also refer to my schematics as the attached files .

MUC_UART0 (1).pdf

MCU_UART0-UART (1).pdf

Jack Wang

over 3 years ago

0 Kallikuppa Sreenivasa over 3 years ago

TI__Guru**** 211050 points

Hello Jack Wang

Thank you for the query.

Checking if you have verified the hardware and checked if some drivers are required for the FT234XD.

I will check with the team internally if we have some inputs. Please expect some delay.

Regards,

Sreenivasa

0 jack wang over 3 years ago in reply to Kallikuppa Sreenivasa

Prodigy 200 points

Dear Sreenivasa ,

PC can detect FT234XD COM port . Do you have any updates ?

Jack Wang

0 Kallikuppa Sreenivasa over 3 years ago in reply to jack wang

TI__Guru**** 211050 points

Hello Jack Wang

Thank you for the inputs.

FT234XD - we do not have this on the EVM. I assume you have confirmed you have the required drivers. Did you probe the signals to make sure the hardware is correct.

I have been waiting for your inputs. I will check if we could provide some guidance.

Regards,

Sreenivasa

0 jack wang over 3 years ago in reply to Kallikuppa Sreenivasa

Prodigy 200 points

Dear Sreenivasa ,

I am sorry to reply you late as the Chinese New year holidays . I am sure the FT234XD hardware is correct as it has used on my another product with driver . Please help check if MCU_UAET0 port can be terminal ?

Jack ｗang

0 Kallikuppa Sreenivasa over 3 years ago in reply to jack wang

TI__Guru**** 211050 points

Hello Jack Wang

Thank you for the note.

Let me check internally.

Regards,

Sreenivasa

Processors

Processors forum

AM625: AM625