HDVPSS load address

Takasugi Hirokazu

Hello,

Does anyone know how do we switch HDVPSS load address in SDK 5.01 ?

The customer is trying to execute SDK 5.01 with HDVPSS on their development EVM board. But their using DDR memory size is 512MB. (The EVM board has 1GB memory size DDR) Therefore they have to switch load address in the SDK. Especially, syslink and Ducati M3 software have to switch load address from oroginal SDK. But the method of way does not describe any document.

Thank you
Regards
Takasugi

over 14 years ago

0 Velan over 14 years ago

TI__Intellectual 2785 points

Takasugi,

I assume the SDK 5.01 means 5.01.01.80.

Unfortunately different DDR sizes & different memory maps for running this SDK is not taken care in this release. This is planned in the next release.

The load address is fixed in the firmwares. so this release needs to be run in the 1GB memory with addresses already fixed in the firmware (both in HDVPSS and VIdeo M3 firmwares)

Please refer to http://processors.wiki.ti.com/index.php/EZ_SDK_FAQ#What_is_the_memory_partition_for_the_SDK.3F for more details information in the memory partitions by various modules.

Best Regards,

Velan