• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 180 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SPI flash

Francis Kumar
Expert 1330 points
Other Parts Discussed in Thread: AM1808

Hi,

I am using AM1808 Board. My problem is  i am not able to see U-boot prompt. Defaultly AM1808 booting from SPI flash. I have erased and reflshed SPI bootloader. 

I have verified my COM port is working. When the board is in UART2 mode i can able to see the BOOTME message, But i am not able to see any u-boot prompt.

I observed yesterday it was working, Today some times it is showing BOOTME after nothing has come.  If any SPI flash problem or Bootloader correption..

Can anyone help me, i will appreciate.

Thanks

Francis.