SK-AM64B: Can I run the sumple program of EtherNet/IP's Adupter and EtherCAT Slave on SK-AM64B?

Maeda

Prodigy 70 points

Part Number: SK-AM64B
Other Parts Discussed in Thread: TMDS64EVM

Hi.

I want to run the sample program of EtherNet/IP's Adupter and EtherCAT Slave on SK-AM64B.

Can I do that?

Now I run sample program in OPSI boot mode.

Is it correct?

regards,

Maeda

over 2 years ago

0 Ashwani Goel over 2 years ago

TI__Mastermind 27270 points

Hi Meeda,

Thanks for your query.

Generally recommend to use the TMDS64EVM board instead of SK-AM64B for industrial protocol evaluations.

Let me know if need any help further ?

Best Regards

Ashwani

0 Maeda over 2 years ago in reply to Ashwani Goel

Prodigy 70 points

Hi Ashwani,

Thank you for answering. I understand that TMDS64EVM is recommended. However, if there is a way to check the EtherNet/IP Slave on the SK-64B, please let me know. This request will be desired by other people besides myself. And I think there will be more opportunities. If it is feasible in terms of hardware, please support it.

Best Regards

Maeda

+1 Ashwani Goel over 2 years ago in reply to Maeda

TI__Mastermind 27270 points

Sure Maeda,

If there will be any plan change on our side, I will let you know.

Thanks for you kind suggestion and feedback.

Best Regards

Ashwani

Processors

Processors forum

SK-AM64B: Can I run the sumple program of EtherNet/IP's Adupter and EtherCAT Slave on SK-AM64B?