TDA4VM: Any requirement for camera when using TDA4VM chips

SEULKI KIM

Prodigy 20 points

Part Number: TDA4VM

I'm Seulky in charge of Automotive cameras H/W engineer

I have question for you.

1. is there any special requirements or mandatory for camera when we used your chip(TDA4VM)?

e.g Lens(FOV, specific part numbers)

if not, any recommendation for choose lens or something?

over 2 years ago

0 Brijesh Jadav over 2 years ago

TI__Guru**** 492845 points

Hi Seulky,

Well as such, CSIRX and ISP does not limit or force any specific lens or FOV requirement. All you need to make sure is that the ISP is tuned correctly for the new lens.

In the standard released SDK, we use/support below camera module. So if you want to run existing usecase, please use this camera module.

https://www.d3engineering.com/product/designcore-d3rcm-imx390-953-rugged-camera-module/

Regards,

Brijesh

Processors

Processors forum

TDA4VM: Any requirement for camera when using TDA4VM chips