• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 337 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RapidIO: Transmit Flow Control Enable - can use tx flow control?

Eddie3909
Guru 10385 points

Hi

Re: sprue13j.pdf

SPn_CTL_INDEP Bit 30 TX_FLW is either 0 for "Disables transmit flow control (Enables receive link flow control)" or 1 "reserved".

So basically this says the C6472 does not support transmit flow control?

Please confirm.

Cheers