This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi experts,
I'm planning to run the Stereo Disparity Engine (SDE) hardware accelerator demo application as described here. However, I couldn't find the run_app_stereo.sh script in my TDA4VM. Please refer to the image below for confirmation.
For your information, my SDK version is 8.5.
Any assistance provided will be greatly appreciated.
Regards,
Hareendran
Hello Hareendran,
This thread seems to be similar to the below e2e.
Could you please refer below for the response?
Regards,
Nikhil
Hi Nikhil,
Based on my understanding, it seems that the Stereo Disparity Engine (SDE) hardware accelerator demo is not supported on the EdgeAI SDK. Could you please confirm if my understanding is correct?
If that is indeed the case, I would greatly appreciate it if you could suggest alternative demos that can be used to evaluate stereo disparity on this board.
Regards,
Hareendran
Hi Hareendran,
Based on my understanding, it seems that the Stereo Disparity Engine (SDE) hardware accelerator demo is not supported on the EdgeAI SDK. Could you please confirm if my understanding is correct?
Yes, this is correct.
You could evaluate the SDE based on the current available plugins using gstreamer as mentioned in the below document
Depth and Motion Perception Demos — Processor SDK Linux for Edge AI Documentation
Regards,
Nikhil
Hi Nikhil,
Thanks for sharing the helpful document. I appreciate your assistance.
Regards,
Hareendran