TDA4VM: Capture metadata after the image data

Yi Wu

Part Number: TDA4VM

How to capture the metadata. its data type is 0x12 which is different from the image data type 0x2C? Does the patch linked apply for the SDK 08_05_00_11?

over 3 years ago

0 Brijesh Jadav over 3 years ago

TI__Guru**** 501155 points

Hi,

Can you please refer to below FAQ?

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1107616/faq-processor-sdk-j721e-how-to-capture-embedded-metadata-with-the-data-type-0x12-using-csirx

Regards,

Brijesh

0 Yi Wu over 3 years ago in reply to Brijesh Jadav

Prodigy 50 points

Hi Brijesh,

Does the patch apply for SDK version ti-processor-sdk-rtos-j721e-evm_08_05_00_11? I use the command "patch -p1 -d ti-processor-sdk-rtos-j721e-evm_08_05_00_11/tiovx < Added_Support_For_Capture_Metadata.patch", but 3 hunks failed.

0 Brijesh Jadav over 3 years ago in reply to Yi Wu

TI__Guru**** 501155 points

Hi,

No, this patch is based one of the old release, probably SDK8.0. For SDK8.5, you would require to manually take these changes in capture node.

Regards,

Brijesh

Processors

Processors forum

TDA4VM: Capture metadata after the image data