• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 323 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SK-AM62: reference design

Anna
Intellectual 995 points

Part Number: SK-AM62
Other Parts Discussed in Thread: INA231

Hi Dear,

There are some current monitoring devices  in the reference design of AM62. As shown below, INA231 is used to detect current.

Do these circuits have any special function? Can I delete it?

  • 0
    TI__Guru**** 210210 points

    Hello Anna,

    Thank you for the query.

    Anna said:
    Do these circuits have any special function? Can I delete it?

    On the custom board you can delete the INA.

    I would be good to provision for the shunt resistor in the initial prototype.

    You can replace the 4 terminal shunt with a 2 terminal shunt.

    I would recommend connecting 2 test points across the shunt. Use kelvin current sensing approach for connecting the TP.

    Regards,

    Sreenivasa