J721EXSOMXEVM: Which processor is installed on J721EXSOMXEVM?

Sujin Nam

Part Number: J721EXSOMXEVM
Other Parts Discussed in Thread: DRA829, TDA4VM

hello.
We want to purchase J721EXSOMXEVM.

By the way, the introduction page says that TDA4VM and DRA829 processors are used. How can I tell which processor is installed when purchasing?

It is divided into J721EXSOMS01EVM and J721EXSOMG01EVM. If we can distinguish the processor mounting with this part number, how can we tell them apart?

Thank you.

over 2 years ago

0 Robert Eschler over 2 years ago

TI__Guru 51695 points

A full-feature processor is installed on the EVM. The 'G' board is likely the board you will order. The 'S' board includes a socketed processor, which allows processor to be replaced with other devices. This is only needed in very specific situations when customers are programming customer keys.

0 Sujin Nam over 2 years ago in reply to Robert Eschler

Prodigy 180 points

Robert Eschler said:
A full-feature processor

Is this TDA4VM? Or is it DRA829?

0 Robert Eschler over 2 years ago in reply to Sujin Nam

TI__Guru 51695 points

As stated on the board's bill of materials, its part number is XJ721EGBALF. It is neither the TDA4VM or the DRA829, but the super-set device. You can develop software with it for both TDA4VM and DRA829.

Processors

Processors forum

J721EXSOMXEVM: Which processor is installed on J721EXSOMXEVM?