Part Number: PROCESSOR-SDK-J721E
Hello Ti Team,
we do have a question about how to run BIST at boot time before mcu1_0 boots.
Is there any documentation?
Need to enable BIST at boot time using bootstraps pins and need to know how to check the results when mcu1_0 has booted.
Regards.
KAMEL.
Kamel
The HW POST configuration is dictated by these pins which on the EVM are mapped to SW9. Based on these pins the POST happens.
To observe the results of this HW POST you can refer the documentation: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/latest/exports/docs/sdl/sdl_docs/userguide/j721e/modules/pbist.html#example-usage and search for "Check the HW POST result (if supported on device):".
Regards
Karan
